Biogas plant
Biogas digester
Biogas membrane
Skid mounted biogas scrubber
Biogas decarbonization and purification system
Biogas generator set
Biogas Flare
Organic waste treatment
Valves
Pumps
Measuring instrument
Blowers

 

   Detail


BIOGAS FLARE SYSTEM
¡¾BIOGAS FLARE SYSTEM¡¿


BIOGAS FLARE SYSTEM

Introduction of the design and structure

1 The flare body is adopted with high temperature resistant castable,The outer is made by 304*4 stainless steel,Chamber fitted with high density ceramic fiber lining of adequate thickness, which can ensure the surface temperature not exceed 60degree. The hood is made by 304 stainless steel. The burner is mad:e by heat-resistant steel (SS321) and It is fitted in the bottom of flare. Flaming air will be enter into the combustion room through the louver in the bottom of flare. The height of biogas flare is 4.29meter, The emission temperature will be 600~700degree and it comply with Europe standard. There is no need to equip combustion air fan and so no extra electricity consumption and noise, energy saving and environmental protection.
2 The biogas flare is a integrate structure. It can be installed in the ground base and then fixed.
3 The flare system include: Flare body, Ignition system, flame detecting system, gas supply electronic valve, automatic controlling system and manual controlling system, stand mounted with a rain hood.
4 Manual blow off valve is fitted.
5"Natural wind lead" combustion chamber raised off the ground and mounted.
6 The flare is designed as secondary ignition. An air inspirator type pilot ignited by a flame front mechanism.
7 Low pressure and high pressure data will be set. Flare will be off in low pressure and on in high pressure with big flame.
8 The electronic valve and flame arrestor is anti-explosion. All the inside pipe is stainless steel material.

Flare model 

ALHJ100

ALHJ600

ALHJ1000

Flare style 

Enclosed type

Combustion mode

"Natural wind lead" combustion,internal combustion 

Material£º

Stainless steel304

Flare diameter

1000mm

1500mm

1800mm

Height of flare

4290mm

5350mm

7100mm

Maximum gas

 consumption

110M3/H

650M3/H

1300M3/H

Flare gas supply pressure

¡İ2000pa

¡İ2500pa

¡İ2500pa

Pipe connected to flare

DN80

DN125

DN200

Flare electric control system

Complete auto Control 

Ignition mode

Secondary ignition 

Accessories

With Blower ,Rain and wind proof hat

Features of ASHJ 

series Flare system

(1) Flare system can control the combustion automatically according to the

 biogas producing rate, it can start automatically once arrive the setted pressure. 

(2) Biogas flare system control the and starting and ignition according to pressure rate.

(3) The whole system including: auto ignition,Flame auto Tracking,flameout auto warming,

combustion auto control.with high stability safety and reliability.

(4) Wind-proof and rain-proof structure


CopyRight©2010Along(HK) Environtech Limited(AEL) . All Right Reserved